DWIL Tub & Tile Paint Kit with Cleaner – 32 oz

All-in-One Tub & Tile Refinishing Kit

Refresh tubs, tile, sinks, showers, and other compatible bathroom or kitchen surfaces with one project-ready system. This kit combines 32 oz of two-part tub and tile paint, Tile & Ceramic Cleaner, hardener, and application tools to support a cleaner, longer-lasting DIY finish.

Coverage
The paint covers roughly 50–60 sq. ft. depending on the surface, original color, and number of coats. The cleaner covers approximately 100–200 sq. ft.; use it twice as directed for best surface preparation.

Prep with Tile & Ceramic Cleaner
The cleaner helps lift grease, residue, and surface contaminants so the coating can bond more effectively to properly prepared tile. Spread it evenly over the surface, let it sit for about 15 minutes, rinse thoroughly, and repeat once. Allow the surface to air-dry completely before painting.

Durable Two-Part Finish
Add the hardener to the paint and mix thoroughly until even. The water-based acrylic coating is designed to provide strong adhesion, water resistance, slip resistance, and a durable finish when applied and cured as directed. Use the mixed paint within 12 hours after adding the hardener.

Where to Use
Designed for properly prepared tubs, sinks, tile walls, tile floors, showers, backsplashes, and similar bathroom or kitchen refresh projects. Compatible surfaces include ceramic tile, porcelain, glass, acrylic, wood, and marble. Not recommended for cultured marble, bare metal, or surfaces that are powdery, peeling, or flaking. Test a small area before full application.

Application & Cure
Apply at least two thin, even coats with the included roller and brush, allowing at least 2 hours between coats. Additional coats may be needed over darker base colors. Keep the coated surface dry for 48 hours and allow 7 days for full cure before normal use. Avoid scratching, scraping, or rubbing the finish during the curing period.